Find out more about the HULK HG Range

Hulk HG range of earth anchors all use a common smasher drive steel. With an ultimate strength of 280kN, the Hulk HG earth anchor range are used for heavy duty anchoring applications. Also available with different wing configurations the HG range cater for a wide variety of ground conditions. The earth anchor models HG100, HG180 and HG320 are all available in galvanised ductile iron..

HULK HG100

Weight
5.25Kg
Material
Ductile Iron
Mechanical Properties
Ultimate Strength: 280kN
Yield Strength: 175kN
Soil Bearing Surface Area
298.96cm²
Typical Installation Depth
2.1m to 9m

HULK HG180

Weight
6.4Kg
Material
Ductile Iron
Mechanical Properties
Ultimate Strength: 280kN
Yield Strength: 175kN
Soil Bearing Surface Area
487.76cm²
Typical Installation Depth
2.1m to 9m

HULK HG180

Weight
11.3Kg
Material
Ductile Iron
Mechanical Properties
Ultimate Strength: 280kN
Yield Strength: 175kN
Soil Bearing Surface Area
1034.54cm²
Typical Installation Depth
2.1m to 9m

Note: Anchor holding capacities are tendon and soil dependent.

Find out more about the HULK H Range

All anchors in the Hulk H range have an ultimate strength of 55kN and all share the same drive rod, this unique feature allows installers of Hulk earth anchors to quickly change from one model to another to adjust for varying ground conditions without purchasing additional installation equipment. All Hulk H earth anchors are available in galvanised ductile iron with a wide range of anchor tendons available. The Hulk H models available are the H50, H80 and H110.

HULK H50

Weight
0.75Kg
Material
Ductile Iron
Mechanical Properties
Ultimate Strength: 55kN
Yield Strength: 35kN
Soil Bearing Surface Area
69.32cm²
Typical Installation Depth
1m to 2.5m

HULK H80

Weight
0.835Kg
Material
Ductile Iron
Mechanical Properties
Ultimate Strength: 55kN
Yield Strength: 35kN
Soil Bearing Surface Area
99.8cm²
Typical Installation Depth
1m to 2.5m

HULK H100

Weight
0.99Kg
Material
Ductile Iron
Mechanical Properties
Ultimate Strength: 55kN
Yield Strength: 35kN
Soil Bearing Surface Area
126.6cm²
Typical Installation Depth
1m to 2.5m

Note: Anchor holding capacities are tendon and soil dependent.

Find out more about the HULK HP Range

HULK HP25

Weight
0.017kg
Material
GRP Plastic
Mechanical Properties
Tensile STrength: 5kN
Soil Bearing Surface Area
18.42cm²
Typical Installation Depth
0.6m to 1.2m

HULK HP35

Weight
0.285kg
Material
Ductile Iron
Mechanical Properties
Ultimate Strength: 30kn Yield Strength: 19kn
Soil Bearing Surface Area
38.75cm²
Typical Installation Depth
0.9m to 2.5m

Note: Anchor holding capacities are tendon and soil dependent.

Shade, Tensile Structures & Adventure Courses

Hulk Earth Anchor provide tensile loads up to 200kN for the structural stabilisation of Agricultural and commercial shade structures.

They are also ideal for:

  • Anchoring shade sails
  • Tensile structures
  • Adventure courses
  • And more

Pipelines & Buoyancy Control

Ideal for pipelines and tanks whether installed above or below ground. Hulk Earth Anchors provide stability and buoyancy control to prevent unwanted movement in permanent or temporary installations. A wide range of options and fittings are available to suit your project requirements.

Landscaping, Turd Reinforcement, Erosion Control & Embankment Stabilisation

Hulk earth anchor are used with reinforced vegetation systems in non structural applications including levees, stream and river banks and stormwater channels. Hulk Earth Anchors together with a shotcrete layer and embedded structural elements offer a cost effective and fast alternative to conventional retaining and embankment stability solutions.

The completely underground tree anchoring system by Hulk Earth Anchors is perfect when guy systems or unsightly stakes are not possible or desirable. Ideal for parks, playgrounds or where sidewalk plantings are required underground tree kits offer fast, easy and safe installation saving time and labour. This practical and cost effective anchoring solution is suitable for securing newly planted trees of all sizes in most situations. Alternatively tree anchoring kits are also available as an above ground tree guying solution.

Utility and Communications Anchoring

Hulk earth anchor can simplify installation of towers by eliminating the need for concrete. Used for communications, electrical transmission and many other applications where a guy attachment anchor is required.

Huge stresses and demands are placed on electrical and communication distribution networks as a result of industrial growth, increasing population and the need for renewable energy. These networks are in constant need of upgrade or refurbishment to meet these demands.

Unique and Effective Earth Anchoring

The engineered design of Hulk earth anchor presents a unique and effective anchor solution where cost effective rapid deployments are possible with the ability to proof test the anchor during the installation process. This allows for anchor installations which are ready for use immediately after installation, preventing costly delays and/or secondary site visits.

Anchoring solution for:

  • Emergency restoration towers
  • Winch points
  • Telecom poles
  • Antennae and masts
  • Electricity poles and stays
  • Power line crossings
  • Tower refurbishment or replacement
  • Conductor restringing

Hulk Earth Anchors can be installed quickly and effectively making them an ideal solution for either permanent or temporary applications.

Advantages over Traditional Anchoring Methods


Hulk Earth Anchors provide anchoring solutions that have many advantages over traditional back staying, guying and dead-man anchoring methods. This is a result of the efficient anchoring system coupled with the light weight and readily available installation equipment.

Retaining Wall Anchoring Solutions

For both temporary and permanent works, Total Anchor systems provide an instant and effective stabilisation solution with no grouting or soil disturbance.

Anchoring with Hulk Earth Anchors provides an aesthetically pleasing and cost effective solution. Hulk Earth Anchors offer instant anchoring to provide overturning stability and protection while eliminating complicated tie-back methods and providing an easy anchoring method to secure:

  • Sheet Piles
  • Excavation Shoring
  • Segmental Retaining Block
  • Reinforced Soil Slopes
  • Gabions
  • Retaining Walls

Cyclone Anchoring for Portable Structures and Other Assets

Total Anchor systems and tie down accessories are available in a variety of configurations to provide the best anchoring and tethering solutions to protect your assets from cyclone, flood , earthquake damage and anything else you don’t want washed away, blown away or shaken apart.

Our range of earth anchors are ideally suited to tying down assets such as:

  • Portable houses
  • Water tanks
  • Shipping containers
  • Domed structures
  • Conveyors
  • Portable lighting
  • Light aircraft

Anti-Theft and General Purpose Anchoring

Prevent unwanted movement with Total Anchor systems by securing items which can be stolen moved or blown away. A range of anchor sizes are available to suite your application needs. Installed without the need for digging or expensive equipment, our solutions are a cost effective, time saving solution for anchoring in a wide range of applications.

Secure your asset with our systems.

  • Parks and recreation equipment
  • Playground equipment
  • Fences
  • Scaffolding
  • Signs
  • Tents
  • And much more…